n Management routes specify the default gateways and local IP subnets for the management interfaces.
n In a Dual-Homed Router Mode configuration, you may need to add a static management route for flow redirection between appliances paired for redundancy at the same site.
n The management routes table shows the configured static routes and any dynamically created routes. If you use DHCP, then the appliance automatically creates appropriate dynamic routes. A user cannot delete or add dynamic routes.
n In an in-line deployment (bridge mode), the wan0 interface displays as bvi0, for bridge virtual interface.
• lan0 ingress traffic is routed to the wan0 next-hop.
• lan1 ingress traffic is routed to the wan1 next-hop.
• wan0 ingress traffic is routed to the wan0 next-hop.
• lan0 ingress traffic is routed to the lan0 next-hop.
n LAN routes provide next-hop addresses for traffic going to LAN-side networks that are not directly connected to an in-line (bridge mode) appliance.
n
n Selecting Inter-VLAN Routing enables the appliance to route packets over another VLAN when the originally specified VLAN is unavailable.
Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com. |