web

Description

Use the web command to configure the Web-based management User Interface.

Syntax

web auto-logout <number of minutes>
no web auto-logout

web {enable | disable}

web http {enable | disable}

web https {enable | disable}

web session max <5–50>
no web session max

Arguments

auto-logout <number of minutes>	Sets the length of user inactivity before auto-logout in minutes. The acceptable range is 10 – 60 minutes. Use the no form of the command to reset the automatic logout feature for Web sessions to the default setting of 1000 minutes.
disable	Disables the Web User Interface.
enable	Enables the Web User Interface.
http {enable | disable}	Enables or disables HTTP access to the Web User Interface.
https {enable | disable}	Enables or disables HTTPS (secure HTTP) access to the Web User Interface.
session max <5–50>	Specifies, as an integer, the maximum number of simultaneous Web sessions. Select a number between 5 and 50. Use the no form of the command to reset the maximum number of sessions to the default of 10.

Defaults

n	The default auto-logout setting is 15 minutes.

n	Web HTTP is disabled.

n	Web HTTPS is enabled.

n	The default HTTP port is 80.

n	The default HTTPS port is 443.

n	The maximum number of simultaneous Web sessions for an appliance is 10.

Command Mode

Global Configuration Mode

See Also

See “show web”.

Usage Guidelines

The acceptable range is between one minutes and 1440 minutes (one day).

Examples

To set the maximum length of keyboard inactivity to 7 hours before automatic logout:

(config) # web auto-logout 420

Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com.