logging

Description

Use the logging <IP Address> command to configure event logging to a specific syslog server.

Use the no form of this command to abstain from sendi

 

event log messages to this server.

Syntax

logging <IP address>
no logging <IP address>

logging <IP address> facility {<facility level> | all}
no logging <IP address> facility {<facility level> | all}

logging <IP address> trap <severity level>

 

Arguments

logging <IP address>	Specifies the IP address to which you want to log events.
facility <facility level>	Specifically sets the facility for messages to this syslog server to one of the following: Local 0, Local 1, Local 2, Local 3, Local 4, Local 5, Local 6, or Local 7
facility all	Specifies all facilities.
trap <severity level>	Sets the minimum severity of log messages saved to this syslog server. You can choose from the following severity options: • none Disables logging • emerg Emergency: system is unusable • alert Action must be taken immediately • crit Critical conditions • err Error conditions • warning Warning conditions • notice Normal but significant condition • info Informational messages • debug Debug-level messages

Defaults

None.

Command Mode

Global Configuration Mode

See Also

See the following related commands:

n	“logging facility”

n	“logging files”

n	“logging local”

n	“logging trap”

n	“show logging”

Usage Guidelines

None.

Examples

To configure the server, 10.10.4.4, to not receive any event logs:

(config) # no logging 10.10.4.4

Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com.