interface tunnel control-packet

Description

Use the interface tunnel control-packet command to configure the appliance’s tunnel health and control packets.

Syntax

interface tunnel <tunnel name> control-packet dscp <DSCP marking for this tunnel>

Arguments

<tunnel name>

Specifies the name for this tunnel.

dscp <DSCP marking for this tunnel>

Specifies the DSCP option for the tunnel’s control packets: • af11 AF11 dscp (001010) • af12 AF12 dscp (001100) • af13 AF13 dscp (001110) • af21 AF21 dscp (010010) • af22 AF22 dscp (010100) • af23 AF23 dscp (010110) • af31 AF31 dscp (011010) • af32 AF32 dscp (011100) • af33 AF33 dscp (011110) • af41 AF41 dscp (100010) • af42 AF42 dscp (100100) • af43 AF43 dscp (100110) • be BE dscp (000000) • cs1 CS1 dscp (001000) • cs2 CS2 dscp (010000) • cs3 CS3 dscp (011000) • cs4 CS4 dscp (100000) • cs5 CS5 dscp (101000) • cs6 CS6 dscp (110000) • cs7 CS7 dscp (111000) • ef EF dscp (101110)

Defaults

The default (and recommended) tunnel health DSCP setting is be.

Command Mode

Global Configuration Mode

See Also

See the following related commands:

n	“show interfaces tunnel”

Usage Guidelines

None.

Examples

None.

 

Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com.