interface tunnel create

Description

Use the interface tunnel create command to create a tunnel interface.

Syntax

interface tunnel <tunnel name> create <(local) IP address> <(remote) IP address>

interface tunnel <tunnel name> create <(local) IP address> <(remote) IP address>
<MinBW in kbps> {<MaxBW in kbps> | auto}

interface tunnel <tunnel name> create appliance-ip <(remote) IP address>

interface tunnel <tunnel name> create appliance-ip <(remote) IP address> <MinBW in kbps> {<MaxBW in kbps> | auto}

interface tunnel <tunnel name> create bonded-tunnel tag-name <overlay name> [bonded-id <overlay ID>]

Arguments

<tunnel name>	Specifies the name for this tunnel.
<(local) IP address>	Specifies the IP address of the local appliance.
<(remote) IP address>	Specifies the IP address of the remote appliance.
<MinBW in kbps>	Specifies the tunnel’s minimum bandwidth in kilobits per second.
<MaxBW in kbps>	Specifies the tunnel’s maximum bandwidth in kilobits per second.
appliance-ip	Specifies the remote IP address for this tunnel.
auto	Auto-negotiates maximum bandwidth in kilobits per second.
bonded-tunnel tag-name <overlay name>	Specifies a tag name for a bonded tunnel.
bonded-id <overlay ID>	Specifies the overlay ID for a bonded tunnel.

Defaults

None.

Command Mode

Global Configuration Mode

See Also

See the following related commands:

n	“show interfaces tunnel”

Usage Guidelines

To see a list of the available tunnel names you may use, enter the following command:

<silver-peak> (config) # interface tunnel ?

Examples

None.

 

Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com.