interface tunnel udp-port

Description

Use the interface tunnel udp-port command to configure the UDP destination port for this tunnel.

Use the no form of this command to reset the UDP destination port for this tunnel to its default.

Syntax

interface tunnel <tunnel name> udp-port <UDP destination port>

no interface tunnel <tunnel name> udp-port

Arguments

<tunnel name>	Specifies the name for this tunnel.
<UDP destination port>	Specifies the UDP destination port for this tunnel.

Defaults

The default UDP destination port is 4163.

Command Mode

Global Configuration Mode

See Also

See the following related commands:

n	“interface tunnel create”

n	“interface tunnel gre-protocol”

n	“interface tunnel ipsec”

n	“interface tunnel mode”

n	“interface tunnel revert”

n	“interface tunnel udp-flow”

n	“show interfaces tunnel”

Usage Guidelines

To see a list of the available tunnel names you may use, enter the following command:

<silver-peak> (config) # interface tunnel ?

Examples

To make UDP port 407 the destination for the tunnel, MataHari:

<silver-peak> (config) # interface tunnel MataHari udp-port 407

Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com.