ntp

Description

Use the ntp commands to configure Network Time Protocol (NTP) on the appliance.

Use the no forms of the command to negate certain NTP options.

Syntax

ntp {disable | enable}
no ntp {disable | enable}

ntp server <IP address>
no ntp server <IP address>

ntp server <IP address> ping

ntp server <IP address> version <version number>

ntp server <IP address> disable
no ntp server <IP address> disable

ntp status

Arguments

disable	Disables NTP on the appliance.
enable	Enables NTP on the appliance.
server <IP address>	Configures the NTP server node with the default NTP version number. Use the no form of this command to remove this NTP server.
server <IP address> ping	Checks the connectivity of this NTP server.
server <IP address> version <version number>	Configures the NTP server node and specifies the NTP version number of this server.
server <IP address> disable	Temporarily disables this NTP server. Use the no form of this command to reenable this NTP server.
status	Shows the status of NTP servers.

Defaults

None.

Command Mode

Global Configuration Mode

See Also

See the following related commands:

n

“ntpdate”

n	“show ntp”

Usage Guidelines

Use the no form of ntp enable and ntp disable negate the NTP option. In other words, to disable NTP, you can use the no ntp enable; to enable ntp, use the no ntp disable.

To remove an NTP server with the address, 170.10.10.4:

<silver-peak> (config) # no ntp server 170.10.10.4

Usage Guidelines

None.

Examples

None.

Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com.