subnet

Description

Use the subnet command to configure subnets.

Use the no form of this command to remove a specific subnet.

Syntax

subnet <ip prefix/length> advertize {enable | disable}

subnet <ip prefix/length> comment

subnet <ip prefix/length> exclude {enable | disable}

subnet <ip prefix/length> local {enable | disable}

subnet <ip prefix/length> metric <0-100>

no subnet <ip prefix/length>

Arguments

<ip prefix/length>	Specifies IP address and subnet. For example, 10.0.10.0/24.
advertize	Subnet is ok to advertize.
advertize disable	Disables subnet advertizing.
advertize enable	Enables subnet advertizing.
comment	Adds a comments for a specified subnet entry.
exclude enable	Excludes a subnet from auto optimization.
exclude disable	Includes a subnet for auto optimization.
local	Subnet is local.
local disable	Disable local determination.
local enable	Enables local determination.
metric <0-100>	Specifies a subnet routing metric. Value can be between 0 and 100. Lower metric values have priority.

Defaults

None.

Command Mode

Global Configuration Mode

See Also

See the following related commands:

n	“subnet ipv6”.

n	“show subnet”.

Usage Guidelines

Use these commands to build each appliance’s subnet table.

Examples

None.

Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com.