system 10gigabit

Description

Use the system 10gigabit command to configure the appliance 10-Gigabit option.

Syntax

system 10gigabit {enable | disable}

Arguments

enable | disable

Globally enables or disables the 10-Gigabit option.

Defaults

None.

Command Mode

Global Configuration Mode

See Also

See “show system”.

Usage Guidelines

This is applicable for platforms that have both 1Gbps and 10Gbps datapath interfaces. This includes the NX-9610, NX-8700, and NX-9700.

For example, the NX-9610 has 6 physical LAN/WAN interfaces and can run in one of two modes (either 4 x 1Gbps fiber interfaces or 2 x 10Gbps fiber interfaces). Use this command to switch between them. Also this command requires a reboot.

Examples

n	To run the 2 x 10Gbps fiber interfaces:

(config) # system 10gigabit enable

 

n	To run the 4 x 1Gbps fiber interfaces:

(config) # system 10gigabit disable

 

Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com.