system nat-all-outbound Description Use the system nat-all-outbound command to configure the inbound source NAT feature. Syntax system nat-all-outbound disable system nat-all-outbound nat-ip {<interface IP address> | auto} system nat-all-outbound nat-ip {<interface IP address> | auto} fallback {enable | disable} Arguments disable Disables outbound source NAT. nat-ip {<interface IP address> | auto} Configures the outbound source NAT IP address. fallback enable Specifies fallback to the next available NAT IP address upon port exhaustion with the current NAT IP address. fallback disable Specifies not to fallback to the next available NAT IP address upon port exhaustion. Defaults None. Command Mode Global Configuration Mode See Also See the following related commands: n “system nat-all-inbound” n “show system” Usage Guidelines None. Examples None.