system router

Description

Use the system router command to configure in-line router mode.

Use the no form of this command to remove in-line router mode in whole or in part.

Syntax

system router <name> create interface <interface> <lan or wan>
no system router <name>

system router <name> dhcp

system router <name> dhcp vlan <VLAN ID> [harden | inbound-max-bw <BW in kbps> | label <interface label> | outbound-max-bw <BW in kbps>]

system router <name> ip <IP address> [harden | inbound-max-bw <BW in kbps> | label <interface label> | outbound-max-bw <BW in kbps>]

system router <name> ip <IP address> <netmask> nexthop <IP address> [vlan <VLAN ID>]

no system router <name> dhcp [vlan <VLAN ID>]

no system router <name> dhcp vlan <VLAN ID> [harden | label <interface label>]

no system router <name> ip <IP address> {harden | label <interface label>}

Arguments

router <name>	Specifies the router name.
create interface <physical interface>	Specifies whether to create lan0, wan0, lan1, wan1, etc.
<lan or wan>	Refers to the LAN side or the WAN side.
dhcp	Adds DHCPv4.
vlan <VLAN ID>	Specifies the DHCPv4 VLAN ID.
harden	Enables interface hardening.
inbound-max-bw <BW in kbps>	Specifies the DHCPv4 VLAN inbound max bandwidth in kilobits per second.
label <interface label>	Specifies the DHCPv4 interface label.
outbound-max-bw <BW in kbps>	Specifies the DHCPv4 VLAN outbound max bandwidth in kilobits per second.
ip <IP address>	Specifies the router IP address
<netmask>	Specifies the netmask. For example, 255.255.255.0, or /24.
nexthop <IP address>	Specifies the Router mode next-hop.

Defaults

None.

Command Mode

Global Configuration Mode

See Also

See the following related commands:

n	“system mode”

n	“show system”

Usage Guidelines

None.

Examples

None.

Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com.