system routing

Description

Use the system routing command to configure interface routing.

Use the no form of this command to reset system-level routing information.

Syntax

system routing inline

system routing redundancy {default | none | lan-native | lan-native-vlan | lan-and-wan | all}

no system routing inline

Arguments

inline	Enables inline router mode.
redundancy	Configures redundancy of routes between interfaces.
default	LAN routing allowed between VLANs and native interfaces (equivalent to lan-native-vlan)
none	No routing allowed between interfaces
lan-native	LAN routing allowed between native interfaces (no routing allowed between VLANs)
lan-native-vlan	LAN routing allowed between VLANs and native interfaces
lan-and-wan	LAN and WAN routing allowed between native interfaces
all	LAN and WAN routing allowed between all interfaces (caveat: this may disrupt DPC)

Defaults

None.

Command Mode

Global Configuration Mode

See Also

See “show system”.

Usage Guidelines

None.

Examples

None.

Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com.