show bridge

Description

Use the show bridge command to display bridge information.

Syntax

show bridge

show bridge [brief]

show bridge interface {lan0 | wan0 | lan1 | wan1}

show bridge mac-address-table [address <address> | bridge <bridge> | interface <interface>]

Arguments

brief	Displays bridge information in brief format.
interface {lan0 | wan0 | lan1 | wan1}	Shows bridge port information.
mac-address-table	Shows bridge MAC address table.
address <address>	Shows bridge MAC address table information for a specific IP address.
bridge <bridge>	Shows bridge MAC address table information for a specific bridge (for example, bvi0).
interface <interface>	Shows bridge MAC address table information for a specific interface. The interface can be lan0, wan0, lan1, or wan1.

Defaults

None.

Command Mode

Privileged EXEC Mode

Global Configuration Mode

See Also

See “bridge” on page 71.

Usage Guidelines

MAC table information is not available in router mode.

Examples

To display bridge information for the lan1 interface:

Tallinn2 (config) # show bridge mac-address-table interface lan1

MAC Address Dst Port Learned Port Type Age (s)

----------------- ---------- ------------ --------------- -------

00:e0:ed:0c:19:69 lan1 same local 0.00

Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com.