show interfaces

Description

Use the show interfaces command to display the detailed running state for any or all interfaces.

Syntax

show interfaces [brief | configured]

show interfaces [<interface>]

Arguments

show interfaces	Displays the detailed running state for all interfaces.
interfaces brief	Displays the brief running state for all interfaces.
interfaces configured	Displays the configuration for all interfaces.
interfaces <interface>	Shows the detailed running state for the specified interface, only.

Defaults

None.

Command Mode

User EXEC Mode [only usable for the show interfaces command when it takes no arguments]

Privileged EXEC Mode

Global Configuration Mode

See Also

See the following related commands:

n	“show interfaces pass-through”

n	“show interfaces tunnel”

Usage Guidelines

For a list of all the available interfaces only, login in Privileged EXEC Mode or Global Configuration Mode, and enter the following command:

Silver-Peak # show interfaces ?

Examples

n	To show the detailed running state for lan0.

Tallinn (config) # show interfaces lan0

Interface lan0 state

Admin up: no

Link up: no

IP address:

Netmask:

Speed: UNKNOWN

Duplex: UNKNOWN

Interface type: ethernet

MTU: 1500

HW address: 00:0C:BD:00:7F:4B

 

RX bytes: 0

RX packets: 0

RX mcast packets: 0

RX discards: 0

RX errors: 0

RX overruns: 0

RX frame: 0

 

TX bytes: 0

TX packets: 0

TX discards: 0

TX errors: 0

TX overruns: 0

TX carrier: 0

TX collisions: 0

Tallinn (config) #

 

Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com.