show interfaces tunnel

Description

Use the show interfaces tunnel command to display detailed running state for any and all tunnels.

Syntax

show interfaces tunnel [brief | configured | peers | summary]

show interfaces tunnel <tunnel name> [brief | configured | fastfail | ipsec [status] | summary]

show interfaces tunnel <tunnel name> stats flow [<traffic class 1-10>]

show interfaces tunnel <tunnel name> stats ipsec

show interfaces tunnel <tunnel name> stats latency

show interfaces tunnel <tunnel name> stats qos [<DSCP value>]

show interfaces tunnel <tunnel name> stats traffic-class

Arguments

brief	Displays brief running state for the tunnel(s).
configured	Displays configuration for the tunnel(s).
fastfail	Displays Fastfail information. When multiple tunnels are carrying data between two appliances, this feature determines on what basis to disqualify a tunnel from carrying data, and how quickly.
peers	Displays table summary information for all tunnel peers.
redundancy	Displays redundancy information (regarding WCCP or VRRP) for the tunnel(s).
summary	Displays summary information for the tunnel(s).
tunnel <tunnel name>	Displays the detailed running state for this tunnel.
ipsec status	Displays the specified tunnel’s IPSec information.
stats flow	Displays the flow metrics for the default traffic class in the designated tunnel.
stats flow <traffic class 1-10>	Displays the flow metrics for the specified traffic class in the designated tunnel.
stats ipsec	Displays the IPSec statistics for the designated tunnel.
stats latency	Displays the latency metrics for the designated tunnel.
stats qos	Displays the default QoS statistics for the designated tunnel. The default DSCP value is be (best effort).
stats qos <DSCP value>	Displays the QoS statistics for the specified DSCP value in the designated tunnel.
stats traffic-class	Displays the traffic class statistics for the designated tunnel.

Defaults

n	The default DSCP value for QoS is be (Best Effort).

Command Mode

Privileged EXEC Mode

Global Configuration Mode

See Also

See the following related commands:

n	“show interfaces”

n	“show interfaces pass-through”

n	“show tunnel”

Usage Guidelines

n	If you don’t specify a tunnel, then the output includes information for all tunnels.

n	If you do specify a tunnel, then the output is limited to that tunnel.

n	This command is equivalent to the show tunnel command.

Examples

n	To display summary information for the tunnel, “HQ-to-Branch”:

Tallinn (config) # show interfaces tunnel HQ-to-BranchA summary

Tunnel Admin Oper Remote IP Uptime

-------------------------------- ----- ------------ ---------------- --------

HQ-to-BranchA up Down 172.30.5.2 0s

Tallinn (config) #

 

n	To display the IPSec status information for the tunnel, “HQ-to-Branch”:

Tallinn (config) # show interfaces tunnel HQ-to-BranchA ipsec status

Tunnel HQ-to-BranchA ipsec state

Tunnel Oper: Down

IPSec Enabled: no

IPSec Oper: Disabled

Total IPSec SAs: in:0 out:0

Tallinn (config) #

 

 

n	To display the traffic class statistics for the tunnel, “gms_dm-vx3000a_dm-vx3000b”:

dm-vx3000a (config) # show interfaces tunnel gms_dm-vx3000a_dm-vx3000b stats traffic-class

show request for tunnel gms_dm-vx3000a_dm-vx3000b

Tunnel gms_dm-vx3000a_dm-vx3000b traffic class statistics

tc name LAN RX LAN RX WAN TX WAN TX QOS Drops Misc.Drops

Packets Bytes Packets Kbps Packets Packets

1 default 0 0 0 0 0 0

2 real-time 0 0 0 0 0 0

3 interactive 0 0 0 0 0 0

4 best-effort 32132609 46538966888 16922817 23465651199 0 0

5 0 0 0 0 0 0

6 0 0 0 0 0 0

7 0 0 0 0 0 0

8 0 0 0 0 0 0

9 0 0 0 0 0 0

10 0 0 0 0 0 0

dm-vx3000a (config) #

 

 

n	To display the latency statistics for traffic in the tunnel, “tunnel-2-8504”:

eh-3500-1 (config) # show interfaces tunnel tunnel-2-8504 stats latency

Tunnel tunnel-2-8504 QOS 0 Latency Metrics:

Minimum Round Trip Time : 1

Maximum Round Trip Time : 4

Average Round Trip Time : 2

eh-3500-1 (config) #

 

Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com.