Monitoring Commands : show logging
show logging
Description
Use the show logging command to display the logging configuration.
Syntax
show logging
show logging facilities
show logging files upload status
show logging tech-support
Arguments
facilities
Displays the log facilities configuration.
files upload status
Displays the progress of a logging file that’s being saved to a remote host.
tech-support
Displays log entries that the appliance creates for tech support.
Defaults
None.
Command Mode
User EXEC Mode
Privileged EXEC Mode
Global Configuration Mode
See Also
See the following related commands:
n
“show tech-support”
n
“tech-support create job”
Usage Guidelines
None.
Examples
n
To view the logging configuration:
Tallinn (config) # show logging
Local logging level: notice
Default remote logging level: notice
No remote syslog servers configured.
Allow receiving of messages from remote hosts: no
Number of archived log files to keep: 30
Log rotation size threshold: 50 megabytes
Log format: standard
Levels at which messages are logged:
CLI commands: notice
Tallinn (config) #
 
 
n
To monitor the progress of a logging files as it’s being copied from the appliance to a remote host.
Tallinn (config) # show logging files upload status
File Upload Status
Name: -not set-
Status: Ready
Last Upload Status: The system is ready for upload
Start time: -not set-
End time: -not set-
Total upload size: 0
Transferred size: 0
Transfer rate: 0 bps
Percent complete: 0%
Tallinn (config) #
 
 
n
To view the information saved for tech support:
Tallinn (config) # show logging tech-support
Apr 22 01:15:15 Tallinn sysd[781]: TID 1084225888: [sysd.ERR]: WDOG: Gateway datapath ping test FAIL
ED: 2
Apr 22 01:15:20 Tallinn tunneld[779]: TID 182912294944: [tunneld.ERR]: cipsec_recovery_statemachine:
Took IPSec recovery action - tunnel:Tallinn_to_Helsinki still down..
Apr 22 01:16:10 Tallinn tunneld[779]: TID 182912294944: [tunneld.ERR]: cipsec_recovery_statemachine:
Took IPSec recovery action - tunnel:Tallinn_to_Helsinki still down..
Apr 22 01:16:15 Tallinn sysd[781]: TID 1084225888: [sysd.ERR]: WDOG: Gateway datapath ping test FAIL
ED: 2
Apr 22 01:17:00 Tallinn tunneld[779]: TID 182912294944: [tunneld.ERR]: cipsec_recovery_statemachine:
Took IPSec recovery action - tunnel:Tallinn_to_Helsinki still down..
Apr 22 01:17:15 Tallinn sysd[781]: TID 1084225888: [sysd.ERR]: WDOG: Gateway datapath ping test FAIL
ED: 2
Apr 22 01:17:50 Tallinn tunneld[779]: TID 182912294944: [tunneld.ERR]: cipsec_recovery_statemachine:
Took IPSec recovery action - tunnel:Tallinn_to_Helsinki still down..
Apr 22 01:18:15 Tallinn sysd[781]: TID 1084225888: [sysd.ERR]: WDOG: Gateway datapath ping test FAIL
ED: 2
Apr 22 01:18:40 Tallinn tunneld[779]: TID 182912294944: [tunneld.ERR]: cipsec_recovery_statemachine:
Took IPSec recovery action - tunnel:Tallinn_to_Helsinki still down..
Apr 22 01:19:15 Tallinn sysd[781]: TID 1084225888: [sysd.ERR]: WDOG: Gateway datapath ping test FAIL
ED: 2
Apr 22 01:19:30 Tallinn tunneld[779]: TID 182912294944: [tunneld.ERR]: cipsec_recovery_statemachine:
Took IPSec recovery action - tunnel:Tallinn_to_Helsinki still down..
Apr 22 01:20:15 Tallinn sysd[781]: TID 1084225888: [sysd.ERR]: WDOG: Gateway datapath ping test FAIL
lines 1-12
 
 
n
To view the log facilities configuration:
Tallinn3 (config) # show logging facilities
Log Facilities Configuration:
audit: local0
system: local1
flow: local2
Tallinn3 (config) #
 
Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com.