show snmp

Description

Use the show snmp command to display SNMP settings.

Syntax

show snmp [engine ID | user]

Arguments

engine ID	Displays the SNMP engine ID of the local system.
user	Displays the SNMP v3 user security settings.

Defaults

None.

Command Mode

User EXEC Mode

Privileged EXEC Mode

Global Configuration Mode

See Also

None.

Usage Guidelines

None.

Examples

n	To display the SNMP settings:

Tallinn (config) # show snmp

SNMP enabled: yes

System location: third rock from the sun

System contact: ET Fone-Hoam

Read-only community: public

Traps enabled: yes

Events for which traps will be sent:

raise-alarm: System Alarm has been raised

Trap sinks:

172.20.2.191

Enabled: yes

Type: traps version 1

Community: textstring

Interface listen enabled: yes

No Listen Interfaces.

Tallinn (config) #

n	To display the local system’s SNMP engine ID:

Tallinn2 (config) # show snmp engineID

Local SNMP engineID: 0x80005d3b04393062346436376132336534

Tallinn2 (config) #

 

n	To display the SNMP v3 user security settings:

Tallinn2 (config) # show snmp user

User name: admin

Enabled: no

Authentication type: sha

Authentication password: (NOT SET; user disabled)

Privacy type: aes-128

Privacy password: (NOT SET; user disabled)

Tallinn2 (config) #

 

 

 

 

Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com.