show tca

Description

Use the show tca command to display threshold crossing alert settings.

Syntax

show tca

show tca <tca-name>

Arguments

tca <tca-name>

Specifies which threshold crossing alert to display. The options are: • file-system-utilization How much of the file system space has been used, expressed as a percentage. • lan-side-rx-throughput LAN–side Receive throughput, in kilobits per second (kbps). • latency Tunnel latency, in milliseconds (ms). • loss-post-fec Tunnel loss, as tenths of a percent, after applying Forward Error Correction (FEC). • loss-pre-fec Tunnel loss, as tenths of a percent, before applying Forward Error Correction (FEC). • oop-post-poc Tunnel out-of-order packets, as tenths of a percent, after applying Packet Order Correction (POC). • oop-pre-poc Tunnel out-of-order packets, as tenths of a percent, before applying Packet Order Correction (POC). • optimized flows Total number of optimized flows. • reduction Tunnel reduction, in percent (%). • total-flows Total number of flows. • utilization Tunnel utilization, as a percent (%). • wan-side-tx-throughput WAN–side transmit throughput, in kilobits per second (kbps).

Defaults

None.

Command Mode

User EXEC Mode

Privileged EXEC Mode

Global Configuration Mode

See Also

None.

Usage Guidelines

None.

Examples

n	To display a summary of what the defaults are for the various threshold crossing alerts (this information is static because it is not the same as reporting the current state of any alert):

tallinn3 > show tca

file-system-utilization (File-system utilization): enabled

lan-side-rx-throughput (LAN-side receive throughput): disabled

latency (Tunnel latency): enabled

loss-post-fec (Tunnel loss post-FEC): disabled

loss-pre-fec (Tunnel loss pre-FEC): disabled

oop-post-poc (Tunnel OOP post-POC): disabled

oop-pre-poc (Tunnel OOP pre-POC): disabled

optimized-flows (Total number of optimized flows): disabled

reduction (Tunnel reduction): disabled

total-flows (Total number of flows): disabled

utilization (Tunnel utilization): disabled

wan-side-tx-throughput (WAN-side transmit throughput): disabled

tallinn3 > fil

 

n	To display how reduction is currently configured in the threshold crossing alerts:

tallinn3 > show tca reduction

reduction - Tunnel reduction:

default

enabled: no

A-to-B

enabled: yes

falling:

raise-threshold: 20 %

clear-threshold: 35 %

pass-through

enabled: no

pass-through-unshaped

enabled: no

tallinn3 >

Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com.