selftest

Description

Use the selftest command to run a self test and diagnostics.

Syntax

selftest start disk

selftest stop disk

Arguments

start disk	Starts a disk self test operation.
stop disk	Stops a disk self test operation..

Defaults

None.

Command Mode

Privileged EXEC Mode

Global Configuration Mode

See Also

See the following related commands:

n	“show selftest”

Usage Guidelines

When you enter , the following message appears:

This is an intrusive self test. This test will put the system in bypass mode and perform read/write operations on the disks. The system will not process any network traffic for the duration of the test. At the end of the test, you need to reboot the system. While the test is running, if you attempt to run other commands, you will receive errors.

Do you want to proceed? (y/n) [If you don’t respond, the question times out.]

Disk self test has been canceled.

Examples

None.

Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com.