TCP/IP Ports Used by the Orchestrator
and Silver Peak AppliancesFollowing are lists of ports that are used by the appliances and by the Orchestrator. These are the ports used for “listening”.It is mandatory for certain ports to be open. Opening other ports is optional (opt.), depending on your network, applications, and chosen deployment.
Must open port? Direction relative to the Orchestrator communications between the Orchestrator and a physical or virtual appliance This is the default port. If you’ve configured a different port, then you also need to configure the firewall with that port number. This is the default port. If you’ve configured a different port, then you also need to configure the firewall with that port number. If the appliance’s web configuration is for HTTP only, then you must open this port. This is for packets that traverse the optimization path. For creating tunnels, at least one of the first three applications — GRE, IPSec, or UDP — must be open.
Must open port ? Protocol ESP 50;
UDP port 500 (for IKE key exchange) WCCP CRE tunnel If L3 WCCP redirection is enabled, then Protocol 47 is used to redirect traffic between WCCP router and VXOA appliance, in both directions.It is mandatory for certain ports to be open. Opening other ports is optional (opt.), depending on your network, applications, and chosen deployment.
Direction relative to the appliance communication with VXOA clients and with the Orchestrator communication with VXOA clients user authentication and authorization user authentication and authorization
Please send comments or suggestions regarding user documentation to techpubs@silver-peak.com. |