Router Mode HA (MPLS + MPLS)

A default route must be advertised in subnetA portion of a network that shares a common address component. On TCP/IP networks, subnets are defined as all devices whose IP addresses have the same prefix. For example, all devices with IP addresses that start with 100.100.100. would be part of the same subnet. Dividing a network into subnets is useful for both security and performance reasons. IP networks are divided using a subnet mask. sharing from the data center for InternetA global network of interconnected computers, enabling users to share information along multiple channels.. Only two WANWide Area Network links are supported - wan0/wan1.
Active/Standby is suggested.

Figure 24. Router Mode HA (MPLS + MPLS)

Concepts

Deployment Profiles

Deployment Modes

Example Deployments

Tasks

Configuring Deployment Profiles

Related Topics

In-Line Deployments

In-Line Bridge vs In-Line Router

In-Line Overview

Out-of-Path Deployments

Server Mode Deployments

Deploying in NAT Environments

Router Mode Considerations

In-Line Router Mode (Router + Firewall)

In-Line Router Mode (Router + Direct Internet)

In-Line Router Mode (Single Direct Internet)

In-Line Router Mode (Dual Direct Internet)

In-Line Router Mode (Dual MPLS)

Bridge Mode (Router + Direct Internet)

Bridge Mode (Router + Firewall)

Bridge Mode (Dual MPLS)

Router Mode MPLS + Internet

Dual Home Router Mode (MPLS + Internet)

Dual Home Router Mode HA (MPLS + Internet)