Step 7: Verify a Deployment Profile 

Deployment Profiles are used during the deployment wizard to help streamline the installation process by requesting all the locally significant config items per site.

1. Go to Configuration > Deployment.

   

   Figure 11. Configuration > Deployment

2. A default inline router mode profile exists for routed installations. To implement the inline bridge deployment method, click Add.

   

3. Type in-line bridge.

   

4. Click Save.

   

5. Click Bridge Mode.

   

6. Map the WAN label to the MPLS interface.

   

   1. Add shaping Kbps to the MPLS interface.

      

      NOTE:  It is important to set the actual WAN bandwidth. If you are unsure, use the lower number. If asymmetric bandwidths, click shape inbound traffic to unshadow inbound.

   2. ADD the bridge interface for INTERNET.

      

7. Map the WAN label to the INTERNET interface.

   

   1. Add shaping Kbps to INTERNET interface.

   

   NOTE:  You must set the actual WAN bandwidth. If you are unsure, use the lower number. If asymmetric bandwidths, click shape inbound traffic to unshadow inbound.

8. Sum the shaping Kbps.

   

9. Save the Deployment Profile.